Post a pic of your axe



Here are the pics of the finished article.

Logon or register to see this image
Logon or register to see this image


A very classic looking offering we made for Joe .We wanted to capture a lightly faded 59 LP vibe, but with all the creature comforts and refinements that we like to add:

Three piece quartersawn neck, volute , Dunlop 6100 frets, Earvana Compensated tuning nut, Sperzel tuners, TonePros tunamatic bridge and tailpiece studs, and a lightweight aluminium tailpiece.

Turned out very nicely too!

The pickups are a pair of Bare Knuckle Pickups Mules wired via a harness with CTS/BKP 550k pots and a pair of Jensen paper in Oil caps - although the neck tone is a CTS500k push pull that coil splits the neck pickup for singel coil sounds.

That looks quite a bonny one Joe lad! Look after it and divin't break the buggers neck!
 
What strings is everyone on at the minute. This tanglewood i got has some on they feel like 10's and the top sounds lovely, but the bottom ends sounds as tinny as owt
 
Here are the pics of the finished article.

Logon or register to see this image
Logon or register to see this image


A very classic looking offering we made for Joe .We wanted to capture a lightly faded 59 LP vibe, but with all the creature comforts and refinements that we like to add:

Three piece quartersawn neck, volute , Dunlop 6100 frets, Earvana Compensated tuning nut, Sperzel tuners, TonePros tunamatic bridge and tailpiece studs, and a lightweight aluminium tailpiece.

Turned out very nicely too!

The pickups are a pair of Bare Knuckle Pickups Mules wired via a harness with CTS/BKP 550k pots and a pair of Jensen paper in Oil caps - although the neck tone is a CTS500k push pull that coil splits the neck pickup for singel coil sounds.
Shite inlays
 

Back
Top